[EthercatDevice_QECRXXHU]
説明
Set the packet format.
Class Modules
class EthercatDevice_QECR11HU5S; /* MPG + Keypad + LCM + RS232x2, RJ45 power [1, 1] */ class EthercatDevice_QECR00HU5S; /* MPG + Keypad + LCM + RS232x2, RJ45 power [0, 0] */ class EthercatDevice_QECR11HU9S; /* MPG + Keypad + LCM + RS232/485x2, RJ45 power [1, 1] */ class EthercatDevice_QECR00HU9S; /* MPG + Keypad + LCM + RS232/485x2, RJ45 power [0, 0] */
Format
int uartSetFormat(int dev, uint8_t format);
Syntax
EthercatDevice_QECRXXHU slave;
slave.uartSetFormat(0, ECAT_UART_BYTESIZE8 + ECAT_UART_STOPBIT1 + ECAT_UART_NOPARITY);
Parameters
int dev: UART Number (0/1).
uint8_t format:
ECAT_UART_BYTESIZE5
ECAT_UART_BYTESIZE6
ECAT_UART_BYTESIZE7
ECAT_UART_BYTESIZE8
ECAT_UART_STOPBIT1
ECAT_UART_STOPBIT2
ECAT_UART_NOPARITY
ECAT_UART_ODDPARITY
ECAT_UART_EVENPARITY
Returns
Int: 0 for successful; if the return value is smaller than 0 means an error.
Libraries Reference Home
86Duino のリファレンスのテキストは Arduino レファレンス を編集したもので、 Creative Commons Attribution-ShareAlike 3.0 License下でライセンスされています。リファレンス内のコードサンプルはパブリックドメインとして公開されています。