The QEC-RXXHU series are industrial EtherCAT slave HID modules equipped with EtherCAT protocol. With a wide range of EtherCAT gateway functions, which integrate RS-232/485, MPG (hand wheel), keypad, and LCM into the EtherCAT bus system and are very easy to install and use.
The QEC-RXXHU series can connect industrial equipment that cannot be linked with Ethernet to the EtherCAT bus, converting data and sending it to the master or the PC, perfectly realizing diversified applications.
| Specification | Description |
| Protocol | EtherCAT |
| Connector |
|
| Transmission Rate | 100Mbps |
| Power Requirement | +24VDC @ 220mA (Typ.) |
| Power Consumption | 1.2W |
| LED Indicator | PWR, RUN, DI status |
| Operating Temperature | -20°C to +70 °C |
| Dimension | 105 x 66 x 30mm (Without DIN-Rail) |
| Installation | DIN rail |
| Serial Ports | |
| Channels | 2 |
| Interface Mode | RS232/RS485 |
| Data transfer rate (Baud_Rate) | 2400,4800,9600,14400,19200,38400,57600,115200 |
| Data width | 5/6/7/8 |
| Hardware Flow Control | Support |
| HandWheel MPG | |
| Control Axes | Quadrature A/B Phase with axes selection |
| Input | Jog and federate override |
| Keypad | |
| Matrix | 4×4 |
| LCM | |
| LCD Module | 2 lines, 16 characters per line |
English 
繁體中文 
日本語