ServoFrameVstone Builder

[Servo86]

Description

Initialize the ServoFrameVstone category.

ServoFrameVstone is inherited from the ServoFrame category and can load robotic frames made with the RobovieMaker2 action editor.

Syntax

ServoFrameVstone myframe
ServoFrameVstone myframe(filename, frame_name)

Parameters

• filename: The name of the .txt action file saved by RobovieMaker2.
• frame_name: The name of the action frame (available in RobovieMaker2).

If the above two parameters are entered, ServoFrameVstone will automatically load the specified action frame in the file as the initial action frame when the class is initialized. Note that you must place the file in the root directory of the SD card; if your 86Duino is not placed on the SD card, or if the SD card does not contain the action file, the file loading will fail.

Example

#include <Servo86.h>
 
Servo myservo0;
Servo myservo1;
Servo myservo2;
 
// Load "Frame 0" in vstone_motion.txt motion file from SD card
ServoFrameVstone myframe("vstone_motion.txt", "Frame 0");
 
void setup()
{
   myservo0.attach(21);
   myservo1.attach(23);
   myservo2.attach(25);
   myframe.playPositions(myservo0, myservo1, myservo2); // play action frames
}
 
void loop() {}

See also

• load()
• setPositions()

Libraries Reference Home

The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.