ServoOffsetInno.load()

[Servo86]

Description

Load the .oxt servo offset trim file created by the Innovati Action Editor.

Syntax

myoffset.load(filename)

Parameters

• myoffset: the object of ServoOffsetInno type.
• filename: The name of the .oxt servo offset trim file saved by the Innovati Action Editor. Note: This function will only look for the specified file under the root directory of the SD card. If your 86Duino does not have an SD card inserted, or if there is no specified file on the SD card, loading will fail.

Returns

• true: The file was loaded successfully.
• false: File loading failed.

Example

#include <Servo86.h>
 
Servo myservo0;
Servo myservo1;
Servo myservo2;
ServoOffsetInno myoffset;
 
void setup()
{
   myservo0.attach(9);
   myservo1.attach(11);
   myservo2.attach(5);
 
   myoffset.load("Inno_offset.otxt"); // load the fine-tuning value from the .otxt file
   myoffset.setOffsets(myservo0, myservo1, myservo2); // Set the offset fine-tuning value of each servo
}
 
void loop() {}

See also

• offsets[]
• save()

Libraries Reference Home

The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.