pinMode()

[Digital I/O]

Description

Configures the specified pin to behave either as an input or an output. See the description of digital pins for details on the functionality of the pins.It is possible to enable the internal pullup resistors with the mode INPUT_PULLUP. Additionally, the INPUT mode explicitly disables the internal pullups.

Syntax

pinMode(pin, mode)

Parameters

pin: the number of the pin whose mode you wish to set
modeINPUTOUTPUT, or INPUT_PULLUP. (see the digital pins page for a more complete description of the functionality.)

Returns

None

Example Code

int ledPin = 13;                // LED connected to digital pin 13
 
void setup()
{
  pinMode(ledPin, OUTPUT);      // sets the digital pin as output
}
 
void loop()
{
  digitalWrite(ledPin, HIGH);   // sets the LED on
  delay(1000);                  // waits for a second
  digitalWrite(ledPin, LOW);    // sets the LED off
  delay(1000);                  // waits for a second
}

Note

Unlike Arduino, the analog input pins (referred to as A0, A1, etc) of 86Duino cannot be used as digital pins.

See also


Language Reference Home

The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Leave a Comment

Scroll to Top