micros()

[Time]

描述

Returns the number of microseconds since the 86Duino board began running the current program. This number will overflow (go back to zero), after approximately 70 minutes. This function has a resolution of one microsecond.

Note: there are 1,000 microseconds in a millisecond and 1,000,000 microseconds in a second.

參數

None

回傳

Number of microseconds since the program started (unsigned long)

範例程式碼

unsigned long time;
 
void setup() {
  Serial.begin(9600);
}
void loop() {
  Serial.print("Time: ");
  time = micros();
  //prints time since program started
  Serial.println(time);
  // wait a second so as not to send massive amounts of data
  delay(1000);
}

參考

• [程式語法] millis()
• [程式語法] delay()
• [程式語法] delayMicroseconds()

語法參考主頁面

86Duino 參考的文本是根據 知識共享署名-相同方式分享 3.0 許可證，部分文本是從 Arduino 參考 修改的。 參考中的代碼示例已發佈到公共領域。