[EthercatDevice_DmpDIQ_Generic]
描述
Read the digital input state of all pins of the EtherCAT slave device simultaneously.
衍生類別：
Class Name VID PID Inputs Outputs MCU DC Wire Detection EthercatDevice_QECR00DF0S 0x00000bc3 0x0086d30D 16 0 O EthercatDevice_QECR00DF0D 0x00000bc3 0x0086d300 16 0 O O EthercatDevice_QECR00DF0H 0x00000bc3 0x0086d30B 16 0 O O EthercatDevice_QECR00DT0L 0x00000bc3 0x0086d323 32 0 EthercatDevice_QECR00DT0H 0x00000bc3 0x0086d701 32 0 O O EthercatDevice_QECR00D88S 0x00000bc3 0x0086d309 8 8 O EthercatDevice_QECR00D88D 0x00000bc3 0x0086d301 8 8 O O EthercatDevice_QECR00D88H 0x00000bc3 0x0086d30F 8 8 O O EthercatDevice_QECR00DC4D 0x00000bc3 0x0086d304 12 4 O O EthercatDevice_QECR00D4CD 0x00000bc3 0x0086d302 4 12 O O EthercatDevice_QECR11DF0S 0x00000bc3 0x0086d30E 16 0 O EthercatDevice_QECR11DF0D 0x00000bc3 0x0086d0d2 16 0 O O EthercatDevice_QECR11DF0H 0x00000bc3 0x0086d306 16 0 O O
語法
uint32_t digitalReadAll();
參數
無
回傳值
Return a 32-bit unsigned integer that represents the combined state of all digital input pins. Each bit in the returned value corresponds to a digital input pin of the EtherCAT slave device, with the following mapping:
- Bit 0 indicates digital input pin 0.
- Bit 1 indicates digital input pin 1.
- And so on, up to bit 31 which indicates digital input pin 31.
A value of 1 indicates that the corresponding pin is currently HIGH, while a value of 0 indicates that it is currently LOW.
備註
This function must be called after a successful execution of EthercatMaster::start() and before EthercatMaster::stop(). This function is non-blocking and can be called within the callback functions.
範例
#include "Ethercat.h"
EthercatMaster master;
EthercatDevice_QECR00D88D slave;
void setup() {
Serial.begin(115200);
master.begin();
slave.attach(0, master);
master.start();
}
void loop() {
slave.digitalWriteAll(0x55555555);
delay(1000);
Serial.print("DI: ");
Serial.println(slave.digitalReadAll());
slave.digitalWriteAll(0xAAAAAAAA);
delay(1000);
Serial.print("DI: ");
Serial.println(slave.digitalReadAll());
}Please see EthercatDevice_DmpDIQ_Generic類別 for more QEC DIO slave instructions and API usage.
