EthercatDevice_DmpLCD.touchX()

[EthercatDevice_DmpLCD_Generic]

描述

Read the X-axis position of the touch point on the touchscreen of the LCD module on the EtherCAT slave device. The coordinate will be rotated according to the configuration of lcdSetRotation().

衍生類別：

語法

int touchX(size_t point = 0);

參數

• [in] size_t point
  Touchpoint sequence number. If the device supports multi-touch, this parameter can be used to read the X-axis position of the specified touch point.
  • 0: 1st touch point.
  • 1: 2nd touch point.
  • ...等等

回傳值

Return the X-axis position of the touch point. If the return value is smaller than 0, it means an 錯誤代碼.

備註

This function must be called after a successful execution of EthercatMaster::start() and before EthercatMaster::stop(). This function is non-blocking and can be called within the callback functions.

範例

#include "Ethercat.h"

EthercatMaster master;
EthercatDevice_QECR00UN01 slave;

bool Touched = false;
int TouchX;
int TouchY;

void CyclicCallback() {
  if (!Touched && slave.isTouched() > 0) {
    Touched = true;
    TouchX = slave.touchX();
    TouchY = slave.touchY();
  }
}

void setup() {
  Serial.begin(115200);

  master.begin();
  slave.attach(0, master);
  slave.lcdInit(ECAT_LCD_ILI9341_1);
  master.attachCyclicCallback(CyclicCallback);
  master.start();
}

void loop() {
  if (Touched) {
    Serial.print("Touched. X: ");
    Serial.print(TouchX);
    Serial.print(", Y: ");
    Serial.println(TouchY);
    delay(500);
    Touched = false;
  }
  // ...
}

Please see EthercatDevice_DmpLCD_Generic 類別 for more QEC Stepper Drivers instructions and API usage.