CAN.endTransmission()

[CANBus]

Description

End CAN bus data transmission.

Syntax

CAN.endTransmission()

Parameters

None

Returns

  • 0: Indicate function to end transmission is success.
  • -1: Indicates function to end transmission failed.

Examples

#include <CANBus.h>
unsigned char buf[8] = {0, 1, 2, 3, 4, 5, 6, 7};
 
void setup() {
    Serial.begin(115200);
    CAN.begin(CAN_500KBPS); // Configure CAN bus transmission speed to 500KBPS
}
 
void loop() {
    CAN.beginTransmission(0x00);               // Set the CAN device ID to 0x00, using standard data grame.
    CAN.write(buf, 8);                         // Sent 8 bytes of data
    CAN.endTransmission();                     //End transmission    delay(10);
}

See also


Libraries Reference Home

The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Leave a Comment

Scroll to Top