[CANBus]
描述
End CAN bus data transmission.
語法
CAN.endTransmission()
參數
None
回傳
- 0: Indicate function to end transmission is success.
- -1: Indicates function to end transmission failed.
範例
#include <CANBus.h>
unsigned char buf[8] = {0, 1, 2, 3, 4, 5, 6, 7};
void setup() {
Serial.begin(115200);
CAN.begin(CAN_500KBPS); // Configure CAN bus transmission speed to 500KBPS
}
void loop() {
CAN.beginTransmission(0x00); // Set the CAN device ID to 0x00, using standard data grame.
CAN.write(buf, 8); // Sent 8 bytes of data
CAN.endTransmission(); //End transmission delay(10);
}參考
函式庫參考主頁面
86Duino 參考的文本是根據 Creative Commons Attribution-ShareAlike 3.0 License，部分文本是從 the Arduino reference 修改的。 參考中的代碼示例已發佈到公共領域。
