[Modbus]
描述
Send a packet command to the Slave node to write to multiple Coils registers.
語法
node1.writeMultipleCoils(write_address, write_size)
node2.writeMultipleCoils()
(See the example to illustrate the different functions and usage methods with or without parameters)
參數
node1/node2: ModbusMasterNode Object.write_address: The starting address of the Coils register you want to write to.write_size: The size of the Coils register that you want to write to.
回傳
Int: If it succeeds, send back MODBUS_SUCCESS and vice versa, send back EXCEPTION_CODE.
範例
#include <Arduino.h>
#include <Modbus86.h>
ModbusMaster bus1;
ModbusMasterNode node1;
uint8_t result;
void setup()
{
while(!Serial);
Serial1.begin(115200);
bus1.begin(MODBUS_RTU, Serial1);
node1.attach(16, bus1);
node1.setTransmitBuffer(0, true, MODBUS_DATAMODE_BIT);
node1.setTransmitBuffer(1, false, MODBUS_DATAMODE_BIT);
result = node1.writeMultipleCoils(5, 2);
if (result != MODBUS_SUCCESS) {
Serial.print("ErrorCode: ");
Serial.println(result);
}
}
void loop()
{
}#include <Arduino.h>
#include <Modbus86.h>
ModbusMaster bus1;
ModbusMasterNode node1;
uint8_t result;
void setup()
{
while(!Serial);
Serial1.begin(115200);
bus1.begin(MODBUS_RTU, Serial1);
node1.attach(16, bus1);
node1.beginTransmission(5);
node1.sendBit(true);
node1.sendBit(false);
result = node1.writeMultipleCoils();
if (result != MODBUS_SUCCESS) {
Serial.print("ErrorCode: ");
Serial.println(result);
}
}
void loop()
{
}也可以看看
函式庫參考主頁面
86Duino 參考的文本是根據 知識共享署名-相同方式分享 3.0 許可證，部分文本是從 Arduino 參考 修改的。 參考中的代碼示例已發佈到公共領域。