ServoOffsetInno.load()

[Servo86]

描述

Load the .oxt servo offset trim file created by the Innovati Action Editor.

語法

myoffset.load(filename)

參數

• myoffset: the object of ServoOffsetInno type.
• filename: The name of the .oxt servo offset trim file saved by the Innovati Action Editor. Note: This function will only look for the specified file under the root directory of the SD card. If your 86Duino does not have an SD card inserted, or if there is no specified file on the SD card, loading will fail.

回傳

• true: The file was loaded successfully.
• false: File loading failed.

範例

#include <Servo86.h>
 
Servo myservo0;
Servo myservo1;
Servo myservo2;
ServoOffsetInno myoffset;
 
void setup()
{
   myservo0.attach(9);
   myservo1.attach(11);
   myservo2.attach(5);
 
   myoffset.load("Inno_offset.otxt"); // load the fine-tuning value from the .otxt file
   myoffset.setOffsets(myservo0, myservo1, myservo2); // Set the offset fine-tuning value of each servo
}
 
void loop() {}

參考

• offsets[]
• save()

函式庫參考主頁面

86Duino 參考的文本是根據 知識共享署名-相同方式分享 3.0 許可證，部分文本是從 Arduino 參考 修改的。 參考中的代碼示例已發佈到公共領域。