[USB]
描述
Keyboard.begin() starts emulating a keyboard connected to a computer. To end control, use Keyboard.end().
語法
Keyboard.begin()
參數
無
回傳
nothing
範例
void setup() {
// make pin 2 an input and turn on the
// pullup resistor so it goes high unless
// connected to ground:
pinMode(2, INPUT_PULLUP);
Keyboard.begin();
}
void loop() {
//if the button is pressed
if(digitalRead(2)==LOW){
//Send the message
Keyboard.print("Hello!");
}
}參考
- Keyboard.end()
- Keyboard.press()
- Keyboard.print()
- Keyboard.println()
- Keyboard.release()
- Keyboard.releaseAll()
- Keyboard.write()
語法參考主頁面
86Duino 參考的文本是根據 知識共享署名-相同方式分享 3.0 許可證，部分文本是從 Arduino 參考 修改的。 參考中的代碼示例已發佈到公共領域。