EthercatDevice_DmpStepper.machineServoOff()

[EthercatDevice_DmpStepper_Generic]

描述

Turn off all motors of the machine on the EtherCAT slave device.

Since this function is a non-blocking function and the update() function needs to be called continuously to execute the state machine, it may take some time to complete, so the related status may take some time to respond, such as machineIsServoOn().

衍生類別：

語法

int machineServoOff();

參數

無

回傳值

Return an error code. If the returned value is zero, it indicates a successful execution of this function.

備註

This function must be called after a successful execution of EthercatMaster::start() and before EthercatMaster::stop(). This function is blocking and cannot be called within the callback functions.

This function only works in G-code Controller mode on the EtherCAT slave device. For more details, please refer to configDeviceMode().

This function does not work in the following cases:

• The machine is homing.
• The machine is moving.

範例

#include "Ethercat.h"

EthercatMaster master;
EthercatDevice_QECR11MP3S slave;

void CyclicCallback() {
  slave.update();
}

void setup() {
  master.begin();
  slave.attach(0, master);
  master.attachCyclicCallback(CyclicCallback);
  master.start();

  slave.machineServoOn();
  while (slave.machineIsServoOn() == 0);
  delay(1000);
  // ..
  slave.machineServoOff();
  while (slave.machineIsServoOn() == 1);
}

void loop() {
  // ...
}

Please see EthercatDevice_DmpStepper_Generic 類別 for more QEC Stepper Drivers instructions and API usage.