AIServoOffset.offsets[]

[AIServo86]

描述

Save the user-defined offset of the robot. The unit is degrees.

The first element of the array represents the Servo offset of the first channel, the second element represents the AIServo offset of the second channel, and so on.

Up to 64 channels of AIServo offsets can be specified.

語法

servooffset.offsets[channel]

參數

  • servooffset: Variable of AIServoOffset type.
  • channel: Range: 0 ~ 63, its value represents the AIServo of the nth channel; please see the example below.

回傳

範例

#include <AIServo86.h>
 
AIServoPort(ROBOTIS, AX12) bus;
AIServo myservo0;
AIServo myservo1;
AIServo myservo2;
AIServoOffset myoffset;
 
void setup()
{
   bus.begin(Serial1, 1000000);
   myservo0. attach(bus, 9);
   myservo1. attach(bus, 11);
   myservo2. attach(bus, 5);
   myoffset.offsets[0] = -20; // Set Offset content
   myoffset.offsets[1] = 5;
   myoffset.offsets[2] = -10;
   // assign the value of Offset to the servo (the value of offsets[0] is assigned to myservo0
   // , the value of offsets[1] is assigned to myservo1, and the value of offsets[2] is assigned to myservo2)
   myoffset.setOffsets(myservo0, myservo1, myservo2);
}
 
void loop() {}

參考


函式庫參考主頁面

86Duino 參考的文本是根據 Creative Commons Attribution-ShareAlike 3.0 License,部分文本是從 the Arduino reference 修改的。 參考中的代碼示例已發佈到公共領域。

發表評論

上部へスクロール