aiservoMultiStop()

[AIServo86]

Description

Stops multiple servos at the same time. After calling this function, the behavior of each servo is the same as the behavior of stop().

Syntax

aiservoMultiStop()
aiservoMultiStop(servo1)
aiservoMultiStop(servo1, servo2)
aiservoMultiStop(servo1, servo2, ... , servo64)

Parameters

servo1 ~ servo64: Variables of AIServo type.

You can enter 1 to 64 parameters of AIServo type, specify the servo to be started, or enter no parameter; when no parameter is entered, it means to stop all servos.

Returns

None.

Example

#include <AIServo86.h>
 
AIServoPort(ROBOTIS, AX12) bus;
AIServo servo0;
AI Servo servo1;
 
void setup()
{
   bus.begin(Serial2, 1000000);
   servo0. attach(bus, 6);
   servo1. attach(bus, 10);
   servo0.setPosition(150);
   servo1.setPosition(160);
   aiservoMultiRun(servo0, servo1); // start servo0, servo1 servos
   delay(500);
}
 
void loop()
{
   servo0.setPosition(90, 2000);
   servo1.setPosition(200, 2000);
   aiservoMultiRun(servo0, servo1); // make servo0, servo1 rotate to the new target position
   delay(1000);
   aiservoMultiStop(servo0, servo1); // stop all servos
   delay(3000); // stop for 3 seconds
   servo0.setPosition(150, 1800);
   servo1.setPosition(160, 1200);
   aiservoMultiRun(servo0, servo1); // make servo0, servo1 rotate to the new target position
   while(isAIServoMultiMoving() == true); // wait for all servos to go to target position
}

See also

Libraries Reference Home

The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.

Leave a Comment

More Articles

Scroll to Top