[Servo86]
Description
Resume the motion of several suspended servos at the same time, so that the servos can continue to rotate to the target position. (This function acts like calling resume() for each specified servo.)
Syntax
servoMultiResume()
servoMultiResume(servo1)
servoMultiResume(servo1, servo2)
servoMultiResume(servo1, servo2, ... , servo45)
Parameters
servo1 ~ servo45: Variable of Servo type.
You can enter 1 to 45 servo type parameters to specify the servos to be restored together. You can also enter no parameters, and when no parameters are entered, it means to restore the motion of all the suspended servos.
Returns
None
Example
#include <Servo86.h>
Servo servo0;
Servo servo1;
void setup()
{
servo0.attach(6); servo1.attach(10);
servo0.setPosition(1500);
servo1.setPosition(1600);
servoMultiRun(servo0, servo1); // turn servo0 and servo1 to the initial position together
}
void loop()
{
servo0.setPosition(900, 2000);
servo1.setPosition(2000, 2000);
servoMultiRun(servo0, servo1); // make servo0, servo1 rotate to the new target position
delay(1000);
servoMultiPause(servo0, servo1); // Pause all servos
delay(3000); // pause for 3 seconds
servoMultiResume(servo0, servo1); // all servos resume rotation
while(isServoMultiMoving() == true); // wait for all servos to go to the target position
servo0.setPosition(1500, 2000);
servo1.setPosition(1600, 2000);
servoMultiRun(servo0, servo1); // make servo0, servo1 rotate to the new target position
while(isServoMultiMoving() == true); // wait for all servos to go to the target position
}See also
Libraries Reference Home
The text of the 86Duino reference is a modification of the Arduino reference and is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.
