ServoFrame.setPositions()

[Servo86]

説明

Set the target position of the specified servo to the action frame content stored in the positions[] array.

Syntax

myframe.setPositions()
myframe.setPositions(servo0)
myframe.setPositions(servo0, servo1)
myframe.setPositions(servo0, servo1, ... , servo44)

myframe.setPositions(time)
myframe.setPositions(time, servo0)
myframe.setPositions(time, servo0, servo1)
myframe.setPositions(time, servo0, servo1, ... , servo44)

Parameters

  • myframe: the object of ServoFrame type.
  • servo0 ~ servo44 (optional): Servo type objects; servo0 uses the value of positions[0], servo1 uses the value of positions[1], and so on.

(Note: If the above parameter is not entered, the first Servo object that is constructed in the program will be servo0, the second Servo object will be servo1, and so on.)

If this value is not set, or if it is set to 0, the servo will rotate at full speed.

Returns

None.

Example

#include <Servo86.h>
  
Servo myservo0;
Servo myservo1;
Servo myservo2;
 
ServoFrame myframe; // declare an action frame object
  
void setup()
{
   myservo0.attach(9);
   myservo1.attach(11);
   myservo2.attach(5);
 
   myframe.positions[0] = 1800; // set the action frame content
   myframe.positions[1] = 1300;
   myframe.positions[2] = 2000;
 
 
   // Set the time to rotate the servo from the current position to the position specified by myframe in 500ms, that is:
   // myservo0 rotates to position[0],
   // myservo1 rotates to position[1],
   // myservo2 rotates to position[2].
   myframe.setPositions(500, myservo0 , myservo1, myservo2);
 
   servoMultiRun(); // command all servos to start turning
}
  
void loop() {}

See also


Libraries Reference Home

86Duino のリファレンスのテキストは Arduino レファレンス を編集したもので、 Creative Commons Attribution-ShareAlike 3.0 License下でライセンスされています。リファレンス内のコードサンプルはパブリックドメインとして公開されています。

コメントする

上部へスクロール