motor.hm_Stop()

[EtherCAT Device CiA402]

描述

Stop the homing operation and wait for the drive to stop based on the configuration specified in setHaltOptionCode().

Relevant Objects

• Object 6040_h: Controlword
• Object 6041_h: Statusword

語法

int hm_Stop(uint32_t timeout_ms = 10000);

參數

• [in] timeout_ms
  Timeout in milliseconds.

回傳值

Return an error code. If the returned value is zero, it indicates a successful execution of this function.

備註

This function must be called after a successful execution of EthercatMaster::start(). This function is blocking and cannot be called in callback functions.

範例程式碼

#include "Ethercat.h"

EthercatMaster master;
EthercatDevice_CiA402 motor;

void setup() {
  master.begin();
  motor.attach(0, master);
  motor.setCiA402Mode(CIA402_HOMING_MODE);
  master.start();

  motor.enable();

  motor.hm_SetHomingMethod(CIA402_HM33);
  motor.hm_SetHomeOffset(0);
  motor.hm_SetHomingSpeeds(100, 20);
  motor.hm_SetHomingAcceleration(100);
  motor.hm_Run();
  delay(1000);
  motor.hm_Stop();
}

void loop() {
  // put your main code here, to run repeatedly:

}

---

Please see the EtherCAT CiA 402 使用手冊 for more QEC EtherCAT instructions and API usage.